5 Ways to Reduce Polymer 3D Printing Costs
Put these tips and strategies into action to cut additive manufacturing cost.
Multi Jet Fusion is a powder bed fusion technology that builds up the manufactured parts layer-by-layer.
First, a movable unit distributes a thin layer of thermoplastic powder. Another movable unit, moving in the orthogonal direction, is equipped with two infrared lamps and a dosing system for the agents to be distributed on the powder bed. The first lamp preheats the powder bed to just below the melting point. Unlike other additive manufacturing technologies, MJF does not require an energy-consuming laser.
Next, the fusing and detailing agents are then applied. Finally, another fusing lamp is attached to this moving unit, fusing the powder to the underlying layer where the fusing agent was applied. This fusing agent increases the absorption of the material for infrared radiation and ultimately causes the grayish discoloration of the components. The detailing agent evaporates during this process and ensures no surrounding powder melts onto the contour. This process ensures sharp edges and dimensional accuracy.
This process begins again for the next layer.
Multi Jet Fusion is usually used for prototypes and functional prototypes. This technology is especially suitable for prototypes that require good mechanical properties (e.g., prototypes for injection molding parts) or need to be used for testing. It is also capable of producing high-quality end-use parts. Plus, unused powder can partially be reused for the next production cycle
As most MJF materials are biocompatible, the technology is often used for orthotics and prosthetics.
Managing Director and Co-Founder at Hopper Mobility
MakerVerse give you the flexibility to source parts however you need. Get instant quotes and quickly order parts with on-demand manufacturing. For sophisticated orders, our team of experts will work with you to develop, align and supervise a manufacturing quality plan from start to finish.
What’s the best material for your project?
Use our interactive technology and material advisor to find out.
Put these tips and strategies into action to cut additive manufacturing cost.
Find the best method, material, and finish for your drone project.
How to achieve a perfect finish.
Which post-processing option is right for your SLS part? This guide explains each option.